The Trackless 74” Front Flail Mower
The Trackless All Purpose Heavy Duty Flail was designed to cut grass, weeds and light brush whether on smooth lawn or rough terrain. Only 33 of the 2 3/4" wide blades cut a 74" width. The straight cutting edge of each blade is parallel to the ground to obtain a velvet smooth cut on well maintained lawns. The weight and the shape of the blades allow the mower to cut and mulch light brush, shrubs and weeds. A unique feature of the Trackless Flail mower is its flexibility, front to rear, with a pivoting of 42° angle. This ensures an even cut and no turf damage when cutting up and over knolls. It also prevents the need to raise the mower when approaching a hill. The 33 blades may be sharpened with a 5 inch disc grinder without being removed form the mower. Shear pin protection avoids damage to the drive system if the mower blades strike an obstruction.
SPECIFICATIONS
Cutting width: 74"
Cutting height: 1 - 4"
Gauge wheels: 2 - 16" x 4" semi-pneumatic
Gauge roller: 6" diameter steel, full width
Rotor tube: 4" diameter with 1 7/16" shaft
Blades: 33 - 2 3/4" wide (can be re-sharpened)
Blade and rotor cutting diameter: 18"
Drive: PTO, gear box, cross shaft, 2 V-belts with spring-loaded idler pulley
Rear deflector: reinforced rubber
Linkage: flexible for uneven ground
Rotor speed @ 540 PTO: 1780 r.p.m.
Blade tip speed @ 540 PTO: 8380 ft./min.
